Vortex 250 Pro Racing Quadcopter Drone by ImmersionRc
The best racing drone just got even better Pre Order now.
New Features of the Vortex 250 Pro
Reduced to 250 size
F3 Processor against the F1
Gen 2 escs 20A with OneShot
Custom 2204 2300kv Race Motors
Black Box Recorder with 2mb memory
Changed to rigid 4mm Arms for extreme strength
Lost model alarm which is louder than its predecessor
Direct connection to PPM , SBUS, Spektrum and XBus
With the massive success with the Vortex 285, and listening to the feedback from the top pilots and our customers, the ImmersionRC team came up with the Vortex 250 Pro, its pure bred racer which will surpass expectations.
With the F1 processor swapped for the F3 weve also included a integrated Black Box recorder, changed the 1806 motors for race spec 2204 2300kv motors, Gen2 20A ESCs with built in Oneshot, Serial receiver support and much more.
The Vortex 250 is ARF almost ready to fly so just add a compatible Rx – CPPM, Spektrum, S-Bus, XBus, EzUHF, and a battery, and go do some drone racing, everything else is included, from the Spironet 5.8Ghz antenna, to the propellors.
The Arms on the 285 were foldable carbon tubes and although very strong were still prone to the odd breakage, the new pro version now has 4mm rigid arms for even more strength for the unexpected collosion with objects or opponents.
The Frame now as a skid frame so the odd scrape along the concrete or tarmac should be survived.
The F1 processor has been updated to the F3, flash memory for BlackBox log storage is built into the board, the lost model buzzer is replaced with a much louder one, and a port is added for direct serial receiver hookup 5V and 3.3v supply options. The F3 Processor as twice the speed of the F1 Predecessor and can allow much more flexible tuning options.
Built in 5.8Ghz Transmitter with Raceband, with 40 channels and can easily switch channels via your remote controller using the built in OSD Menu. Works perfectly with the Fatshark FPV Goggles
Custom colour changes , you can pimp your Vortex 250 pro with various colour options like Hot Pink, Lime Green, White, Black and Orange so you can stand out in the crowd or just be different.
Weight: ~415g without battery, or HD camera
Power Requirements: 3s-4s LiPo (typical)
ESCs: Full Custom, 20A cont. 22A peak, rotorSENSE, OneShot125
Motors: Custom V-Spec 2204-2300kV, with 3mm axles, 5mm shafts
Props: OEM Gemfan 5045 GF Blunt-Nose
Flight Camera: FatShark 700TVL v2 CMOS (included)
HD Camera: GoPro Hero, Hero 3/4
Receiver Compatibility: CPPM, S-Bus, Spektrumâ„¢, XBus, SumH, SumD (no external adapters required) (Auto-Sense!)
Flight Time: Highly dependent upon battery, and flying style